Official Site
中文丨English
E-mail: shenghuahn@shancable.cn
NEWS
Everyone has different needs for their home, so personalized decoration is naturally indispensable. In modern times, many people know that it is best not to move in immediately after a new house is decorated, because paint and new furniture may be accompanied by harmful gases such as formaldehyde. However, few people pay attention to the wires buried in walls or under the floor. In fact, the hidden dangers of wires are also great. In recent years, there have been more and more wire and cable accidents caused by unreasonable decoration.

According to statistics, wire and cable fire accidents have accounted for 40% of electrical fire accidents in recent years. Therefore, it is necessary to enhance the safety awareness of wires and cables in response to this situation. The following are the safety precautions for wires in newly renovated houses:
1. It is necessary to check whether the wiring and insulation of the wires and cables are smooth and in good condition, and regularly check the positions of sockets, switches, etc. The wires must not be exposed to prevent leakage.
2. Do not run wires on damp ground. If there is damage to the wires, it is likely that people will be electrocuted after contact in a damp and watery environment, especially when inserting them. Do not place them in areas with water droplets.
3. The fuse of the main switch must be selected reasonably, and some may choose copper or aluminum wires as a solution, which can easily be burned out. Affects household electricity consumption.
4. Some high-power electrical appliances require the use of wires that comply with international standards. Some unqualified wires will continue to heat up and eventually be damaged after being connected.
5. Due to wiring issues causing a fire, it is important to remember to cut off the power first. Directly extinguishing the fire with water may cause an electric shock accident.
Which 4 types of wires cannot be selected for household use
A 100 meter wire that does not meet the weight and length standards usually weighs about 3 kilograms, and there should be an error of no more than 0.2 kilograms. If the error is significant, it indicates that the wire is cut corners.
Wires without 3C certification are subject to mandatory product certification by the state. Without 3C, there is no safety guarantee
Wires with poor insulation quality can easily cause accidents. When selecting wires, use fire. Fake wires will quickly burn when burned with fire, with open flames and emitting thick smoke. True wires burn slowly, with a small amount of smoke or no smoke, and no open flames.
Purple black copper wire wires cannot be used. High quality copper wire has high brightness, luster, and generally appears purple red. Poor quality wires can easily cause accidents.
Shenghua Cable Group mainly produces high and low voltage cross-linked cables, power cables (YJV, YJV22, YJLV), distribution wires (BV, BVR, RVV, RVS), aluminum alloy cables (YJLHV), overhead cables, flame-retardant and fire-resistant cables, rubber sheathed cables, control cables (KVV), special cables, and other products.